Plantronics + Polycom. Now together as Poly Logo

RPD clients disconnects

Highlighted
Frequent Advisor

RPD clients disconnects

Hi

in a Polycom infrastructure we face the following problem: with a lot of RPD users thery are disconected from the call.

Looking in DMA call events there are a series of

H245 RoundTripDelayRequest

H245 RoundTripDelayResponse

followed by

RAS DisengageRequest (with disengage reason inside :14116)

Endpoint Ended the call normally

RASDiseangageConfirm

 

and the client is disconnected.

 

Can't find till now the reason for this is happening and is very frustatrating

can anybody have a idea how to solve it?

 

many thanks

Message 1 of 5
4 REPLIES 4
Highlighted
Polycom Employee & Community Manager

Re: RPD clients disconnects

Hello @ibucur ,

 

Welcome back to the Poly Community.

  • Is this a day one issue or has this recently changed?
    If recently do you know what has changed in your setup?
  • Is this internal network or external?
  • What are the software versions being used?

 

Most likely this would be something for our support team to look at as we may have to analyze network traces and logs.

 

We are unable to do this via the Poly community so please work with our support organization.

 

Please ensure you follow up your old posts >here< as many of these most likely required Support so you have not yet updated how these were solved.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 5
Highlighted
Frequent Advisor

Re: RPD clients disconnects

Hi Steffen

Yes you are right I didn't provide any feedback about my previous post, but this only because there were remain unsolved. Unfortunatelly our support subscription had expired, and we didn't renew it yet.

 

Regarding this last post, I can detail:

 

is not form day one issue

is present only with clients connected from Internet; internal clients have no problem

3.9 version used

 

thanks

Message 3 of 5
Highlighted
Polycom Employee & Community Manager

Re: RPD clients disconnects

Hello @ibucur 

 

RPD 3.9 is no longer supported. Please try 3.10.3 and the next move forward, if no other volunteer wants to troubleshoot your installation would be to open a support ticket.

 

Best regards

 

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 4 of 5
Highlighted
Frequent Advisor

Re: RPD clients disconnects

thanks Steffen for your advice

best regards

Message 5 of 5