-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Video Conferencing
- Meeting Room Solutions
- Re: RPG microphone array
Create an account on the HP Community to personalize your profile and ask a question
04-19-2018 07:06 AM
Hello,
I am using RPG500 and i would like to add two ceiling microphones.
At the moment,i am using only the tabletop mic which comes in the typical installation.
Is this supported by this device?I know that i can use up to 4,but can it support 2 ceiling and one tabletop?And if yes,how can i connect them with only one mic port on the back of the codec?
Is a daisy chain connection from table to the ceiling?
Thank you!
Solved! Go to Solution.
Accepted Solutions
04-23-2018 03:42 PM
This is possible, the GS 500 supports up to a total of 4 microphone arrays and they can be a combination of tabletop and ceiling.
There is diagrams in both the Set Up Guide (installation guide) and the Integrator's Reference Guide on how to do this. The digital devices must be serially connected, each one plugs into the previous one. To convert from a Walta connection, a.k.a. mini-VGA, to an RJ45 there is an adapter. The Walta Male to RJ45 female is 2457-25646-001 (CLink 2 adapter. Walta (M -codec side) to RJ-45 (F) 18" adapter cable. For connecting Ceiling Microphone Array or other RJ-45 CLink 2 or custom cable to Group Series, HDX series codecs and Polycom SoundStructure). There is also 2457-23716-001 (CLink 2 adapter. Walta (F) to RJ-45 (M) 12" adapter cable. For connecting Ceiling Microphone Array or other RJ-45 CLink 2 or custom cable to Group Series, HDX series codecs and Polycom SoundStructure) available.
04-23-2018 03:42 PM
This is possible, the GS 500 supports up to a total of 4 microphone arrays and they can be a combination of tabletop and ceiling.
There is diagrams in both the Set Up Guide (installation guide) and the Integrator's Reference Guide on how to do this. The digital devices must be serially connected, each one plugs into the previous one. To convert from a Walta connection, a.k.a. mini-VGA, to an RJ45 there is an adapter. The Walta Male to RJ45 female is 2457-25646-001 (CLink 2 adapter. Walta (M -codec side) to RJ-45 (F) 18" adapter cable. For connecting Ceiling Microphone Array or other RJ-45 CLink 2 or custom cable to Group Series, HDX series codecs and Polycom SoundStructure). There is also 2457-23716-001 (CLink 2 adapter. Walta (F) to RJ-45 (M) 12" adapter cable. For connecting Ceiling Microphone Array or other RJ-45 CLink 2 or custom cable to Group Series, HDX series codecs and Polycom SoundStructure) available.
Didn't find what you were looking for? Ask the community