[Software] Poly G7500, Studio X50 and X30 Software 3.2.1 was released
we just released Software 184.108.40.206090 for G7500 and the Studio X series.
Poly announces the release of Poly VideoOS software 3.2.1. The Poly VideoOS software build contains the following device software versions:
● Poly TC8 3.2.1 ● Poly Microphone IP Adapter 3.0.0 ● Poly IP Table Microphone 3.0.0 ● Poly EagleEye Cube USB Camera 1.3.0
These release notes provide information on updates, features, and resolved and known issues for systems using Poly VideoOS software with Poly G7500, Poly Studio X50, and Poly Studio X30. Poly VideoOS software 3.2.1 includes the following features:
● Support for Zoom Rooms 5.2.0
● Register the System Using DHCP Auto Discovery ● Provisioning Configuration Changes ● Disable Preinstalled Certificates ● 3.5 mm Audio Input on Studio X50 ● Device Mode Enhancements ● Video Quality Enhancements
---------------- The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels. Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's