Plantronics + Polycom. Now together as Poly Logo

Telnet API to Enable/Disable H.323 & SIP

RaviShankar
Visitor

Telnet API to Enable/Disable H.323 & SIP

Hi,

 

   I'm trying to enable/disable H.323 & SIP under Admin Settings->Network->IP Network. I was able to edit H.323 settings but couldn't find the command to enable/disable.

Message 1 of 7
6 REPLIES 6
SteffenBaierUK
Polycom Employee & Community Manager

Re: Telnet API to Enable/Disable H.323 & SIP

Hello Ravi,

 

welcome to the Polycom Community.

 

What Polycom technology are you refering too so we can move the post to the correct section.

 

Best Regards

 

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 7
RaviShankar
Visitor

Re: Telnet API to Enable/Disable H.323 & SIP

Hello Stefan,

 

   I'm trying to use commands on Polycom HDX 9K device. Couldn't find the command in Admin's guide http://support.polycom.com/global/documents/support/setup_maintenance/products/video/hdx_ag.pdf

 

Best Regards

- Ravi Shankar R

Message 3 of 7
petet
Trusted Contributor

Re: Telnet API to Enable/Disable H.323 & SIP

Try Admin>Network>Call Preferences.

Message 4 of 7
RaviShankar
Visitor

Re: Telnet API to Enable/Disable H.323 & SIP

Hi Petet,

 

  I need API commad to enable/disable H.323 & SIP.

 

Best Regards

- Ravi Shankar R

Message 5 of 7
petet
Trusted Contributor

Re: Telnet API to Enable/Disable H.323 & SIP

Hi Ravi.  Yes of course, I didn't read your post carefully enough.

I've had a plough through the API in the Integrators & Admin Guide & can only see the option of choosing H.323 or SIP as a dialling type.  I, also cannot see an API command to enable & disable H.323 &/or SIP dialling.

I let Polycom moderators give a definitive answer but it looks like you'll need to enable both dialling types via Web/IR Remote & specify the dialling type in your Telnet Code.

Pete

Message 6 of 7
RJanis
Polycom Employee

Re: Telnet API to Enable/Disable H.323 & SIP

Pete is absolutely correct. These settings can only be modified either directly in front of the system with the remote control or through the web UI.

 

You can find all of the available and supported commands in the Integrator's Reference Manual, located here.

 

Regards,

 

Rob

 

 

Message 7 of 7