Plantronics + Polycom. Now together as Poly Logo

Using Telnet To Backup HDX Units?

SOLVED
Tom_W
Occasional Advisor

Using Telnet To Backup HDX Units?

Is there a way to use a telnet command to do a profile backup of an HDX unit?

Message 1 of 4
1 ACCEPTED SOLUTION

Accepted Solutions
GaryMiyakawa
Respected Contributor

Re: Using Telnet To Backup HDX Units?

If we are talking about Port 24 (the control port on a HDX), then you can use the following.

 

exportprofile -  Exports system and user profile information in a CSV format. The output is

available through a telnet or serial port connection.

 

importprofile - Imports system and user profile information in a CSV format. The input is

submitted through the telnet or serial port.

 

These are furthur documented in the Polycom HDX Intergraters Reference manual available on the Polycom Support site.

 

Gary M

Wanna' Test your H.323 System? (71.14.2.157 or 71.14.2.158)
cb157.miyakawa.us and cb158.miyakawa.us
www.miyakawa.us
www.codecsidekick.com

View solution in original post

Message 2 of 4
3 REPLIES 3
GaryMiyakawa
Respected Contributor

Re: Using Telnet To Backup HDX Units?

If we are talking about Port 24 (the control port on a HDX), then you can use the following.

 

exportprofile -  Exports system and user profile information in a CSV format. The output is

available through a telnet or serial port connection.

 

importprofile - Imports system and user profile information in a CSV format. The input is

submitted through the telnet or serial port.

 

These are furthur documented in the Polycom HDX Intergraters Reference manual available on the Polycom Support site.

 

Gary M

Wanna' Test your H.323 System? (71.14.2.157 or 71.14.2.158)
cb157.miyakawa.us and cb158.miyakawa.us
www.miyakawa.us
www.codecsidekick.com

View solution in original post

Message 2 of 4
Tom_W
Occasional Advisor

Re: Using Telnet To Backup HDX Units?

Thanks Gary!  I read through the API commands and somehow missed that one...

 

Tom Wright

Message 3 of 4
NOSaturn
Advisor

Re: Using Telnet To Backup HDX Units?

Just make sure to disable the Telnet ports afterwards..... [grin]

 

Message 4 of 4