Plantronics + Polycom. Now together as Poly Logo

VSX 7000a - menu won't display

Highlighted
Visitor

VSX 7000a - menu won't display

Hi,

 

for the above camera I can't get the menu to come up on the screen when I press the buttons on the remote.  The remote is working as I can control/move the  camera with it.  I can make a call from the web interface.

 

I have upgraded the firmware to V9

 

Any thoughts/suggestions would be welcome.

 

Thanks,

Bruce

Message 1 of 3
2 REPLIES 2
Honored Contributor

Re: VSX 7000a - menu won't display

Bruce,

 

The most probable case - your monitor is connected as the second one. Menu is shown only on the first monitor.

Find more details in Administrator's Guide for the VSX Series -> Configuring Monitor Settings.

WBR,
Mike
--------------------------------------------
“Reports that say that something hasn't happened are always interesting to me, because as we know, there are known knowns; there are things we know we know. We also know there are known unknowns; that is to say we know there are some things we do not know. But there are also unknown unknowns- the ones we don't know we don't know.”
― Donald Rumsfeld
Message 2 of 3
Highlighted
Visitor

Re: VSX 7000a - menu won't display

Thanks for the reply Mike and apologies for the delay in coming back.

 

It will only display anything on the TV on port that the TV is currently plugged into.  When I check the setup, Monitor 1 is active (16:9, VGA) and Monitor 2 is off.  So I don't believe that is the problem.

 

I am happy to hear other possible options.

 

regards,

Bruce

PS I have attached a screen shot of this