I was wondering if it is possible to view the video from a real presence group 500 video camera from the web management console. I have a requirement to test video conferencing units and I do not want to disturb the conference room if a person or people are currently using it. If you cannot view the camera feed from the web portal, I am open to any other suggestions.
Solved! Go to Solution.
From the RPG Admin Guide:
Enable Room and Call Monitoring
Before you can use room and call monitoring, you must enable the feature in the local interface.
To enable room and call monitoring:
1 In the local interface, go to Settings > Administration >Security > Remote Access.
2 To allow the room or call to be viewed remotely, enable Allow Video Display on Web.
Monitor a Room or Call
The monitoring feature in the web interface allows system administrator to view a call or the room where the
system is installed.
To remotely monitor a room or call:
1 In the web interface, go to Utilities > Tools > Remote Monitoring.
2 You can perform the following tasks out of a call:
Wake the system
Adjust the near camera
Adjust system volume
View camera presets
3 You can perform these additional tasks in a call:
Change camera sources
Adjust the far camera
End a call