Plantronics + Polycom. Now together as Poly Logo

Obi300 for paging stuck on-hook

dzcoeo
Occasional Contributor

Obi300 for paging stuck on-hook

I have an Obi300 ATA set for paging only, however the device is stuck on-hook. We have another device with the same configuration working and it went to off-hook and stays off-hook once configured for paging-only. Is there a way through obi-talk to take the phone port off-hook? Alternatively, is there a way to have the user plug in an analog line and enter something to set the phone port to be permanently off-hook?

Message 1 of 2
1 REPLY 1
Kruzer
Polycom Employee

Re: Obi300 for paging stuck on-hook

You can try the following:

 

First, connect a regular phone to the OBi device phone port, pickup handle so the phone port status can register as OFF-HOOK.
Give 5 to 6 seconds delay and dial tone will go away.
When no dial tone, connect the amplifier/paging to the OBi device phone port again.
Again, phone port should remained status OFF-HOOK.

 

Pls try and let us know.

Message 2 of 2