Plantronics + Polycom. Now together as Poly Logo

Obi312 and Trunks are Broken on 3.2.3 Firmware

Highlighted
Occasional Visitor

Obi312 and Trunks are Broken on 3.2.3 Firmware

It appears that trunks are broken in the 3.2.3 firmware. Attempting to configure a trunk, even with a single disabled port results in the Obi going into a boot loop. What's the chances of an updated firmware some time soon to address this issue? Or is there an older firmware that can be posted that does not suffer from this issue? TIA

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: Obi312 and Trunks are Broken on 3.2.3 Firmware

Hello @jmdomini ,

 

Welcome to the Poly Community.

Please contact obi.spsupport@poly.com


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2