Plantronics + Polycom. Now together as Poly Logo

Auto Dial from SoundPoint IP

Frequent Advisor

Auto Dial from SoundPoint IP



This is my first time. I have question about how to enable auto dial from SountPoint IP. What i mean, up to now if i dialed out either to PSTN or extensions, after i enter the dial number then i pressed the dial button or picked up the handset then SoundPoin IP will send the number to PABX (IP PABX such as Asterisk). How to enable auto dial when the number/digits completed the SoundPoint IP will send the dialed number to PABX  without pressed dial button or picked up tyhe handset, May be that topic already exist but can some one tell me where to find the setting?



Message 1 of 2
Polycom Employee & Community Manager

Re: Auto Dial from SoundPoint IP

Hello Sisob,

welcome to the Polycom Community.

Have a look at the FAQ post here:


Oct 7, 2011 Question: Phone unable to Dial a number when Off Hook or on 2nd Call in a Conference

ResolutionPlease check => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.


Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2