Plantronics + Polycom. Now together as Poly Logo

Base Profile change back to generic after reboot

SOLVED
Cyrus
Occasional Visitor

Base Profile change back to generic after reboot

I have changed base profile to lync on ip335  and it asked me to reboot.

The problem is when it boots up base profiles still shows "Generic"

I've tried both web interface and phone menu.

I've read this "http://community.polycom.com/t5/VoIP/lync-profile-change-back-to-generic/td-p/45611" answer but that's for another model.

I've upgraded via "Polycom_UC_Software_4_1_0_Rev_I_release_sig_split" and upgrader.

My updater version is : 4.4.0.0080

 

Message 1 of 2
1 ACCEPTED SOLUTION

Accepted Solutions
SteffenBaierUK
Polycom Employee & Community Manager

Re: Base Profile change back to generic after reboot

Hello Cyrus,

welcome to the Polycom Community.

The concept of upgrading is the same as in the other post and you BootROM should then show a 5.x.x Version.

 

Please be aware of the following when utilizing UCS 4.1.0 or later:

The use of Polycom UC Software versions 4.1.X (“Software”) requires the purchase of a separate Software license for every device that will use the Software in a Lync environment. You may not install, access, or use the Software in a Lync environment on more devices than are listed on your license until additional licenses have been purchased and authorized by Polycom. These licenses should be purchased from the same company from which you purchased the devices. You may operate devices against a Lync server for trial purposes for up to 30 days without purchasing a license. Use of the Software is subject to the terms and conditions of the End User License Agreement.

Polycom reserves the right to audit your deployment to verify that you have sufficient licenses to match the number of devices being used.

Information in regards of License Part Numbers can be found => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 2
1 REPLY 1
SteffenBaierUK
Polycom Employee & Community Manager

Re: Base Profile change back to generic after reboot

Hello Cyrus,

welcome to the Polycom Community.

The concept of upgrading is the same as in the other post and you BootROM should then show a 5.x.x Version.

 

Please be aware of the following when utilizing UCS 4.1.0 or later:

The use of Polycom UC Software versions 4.1.X (“Software”) requires the purchase of a separate Software license for every device that will use the Software in a Lync environment. You may not install, access, or use the Software in a Lync environment on more devices than are listed on your license until additional licenses have been purchased and authorized by Polycom. These licenses should be purchased from the same company from which you purchased the devices. You may operate devices against a Lync server for trial purposes for up to 30 days without purchasing a license. Use of the Software is subject to the terms and conditions of the End User License Agreement.

Polycom reserves the right to audit your deployment to verify that you have sufficient licenses to match the number of devices being used.

Information in regards of License Part Numbers can be found => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 2