Plantronics + Polycom. Now together as Poly Logo

Blind Transfer missing from UC5.3.0

Occasional Contributor

Blind Transfer missing from UC5.3.0

Hello Polycom,

 

I've been testing the new UC5.3.0 software on a VVX300 in an OpenSIP environment and am happy to say it has fixed our issues with BLF, however now the default behavior of the blind transfer is now gone.

 

Instead of hitting Transfer and then the Blind softkey, my users must now press and hold the transfer button, push down, push select and then input their destination. I've combed through the release notes and do not see a way to restore the old functionality. Is there any way to do this?

 

Thank you,

Brion

NextLevel Internet

Message 1 of 12
11 REPLIES 11
Frequent Advisor

Re: Blind Transfer missing from UC5.3.0

Hi,

 

I have the exact same question. Holding the transfer softkey to do a blind transfer is definitly not a good idea and really slow down the transfer process.

 

 

Message 2 of 12
Frequent Advisor

Re: Blind Transfer missing from UC5.3.0

if you use more often blind transfer, in 5.3 you can set this as default mode in the options

Message 3 of 12
Frequent Advisor

Re: Blind Transfer missing from UC5.3.0

I understand but I train must of my people to use the right transfer type depending on the situation. I would say most of my user us 60% of the time blind and 40% assisted transfer.

 

Message 4 of 12
Frequent Advisor

Re: Blind Transfer missing from UC5.3.0

I'm ok with you, for me it would be best to have two separate buttons, one for blind transfer, one for consultative

Message 5 of 12
Polycom Employee & Community Manager

Re: Blind Transfer missing from UC5.3.0

Hello all,

this is all about the demand for these features and the configurability of individual features.

 

I can only suggest to work with your Polycom resellers so these features or requests can be worked with a Polycom sales engineer.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 6 of 12
Occasional Visitor

Re: Blind Transfer missing from UC5.3.0

I have this same issue with all the VVX phones that have that version of firmware or higher. Thing is that they were used to using the Blind when they had the older firmware so for the new firmware to have it disappear is unacceptable. We need the softkey config entries that can at least put it back for us in the newer firmware please. As soon as possible. Thanks.

Message 7 of 12
Frequent Advisor

Re: Blind Transfer missing from UC5.3.0

Dave,

 

I don't think this will happen anytime soon. Polycom doesn't seem to listen to the community. Steffen will tell you to contact your reseller.

Message 8 of 12
Polycom Employee & Community Manager

Re: Blind Transfer missing from UC5.3.0

Hello Dave Miller,

welcome to the Polycom Community.

 

Nobody is forced to upgrade to a later version and we do comment on new / changed features within the release notes.

 

Example UC Software 5.3.0 Page 14:

 

  • call.DefaultTransferType

The above parameter can be used to change from the default value of a Consultative transfer to a Blind transfer.

 

In addition simply pressing the transfer key log brings up the option to select blind instead.

 

transferMode05.PNG

transferMode04.PNG

 

 

So this gives you in my understanding either the option to select the older behavior or the choice for your customers.

 

Looking up your details seems to be a service provider so based on your Polycom phone install base should be in your interest to work closer with our sales team for these kind of queries.

 

@DavidG

As already outlined back in April in my original reply myself or other Polycom employee's can only advice you on the official path on how to get changes requested in the field.

 

This is via a Feature Request and simply depends on the demand of a certain feature and our focus on supplying this.

 

Anyone can post within this community and demand all sorts of things but our Product managers have no idea if a feature which is being asked for is for a customer with a single Polycom phone or a large organisation with thousands or more.

 

Based on the above like anything else we need to prioritize these in regards of the demand.

 

Jan 03, 2013 Question: How can I request a change to the current Polycom SIP / UCS Software?

Resolution: Please check => here <=

 

The above outlines this in detail and if you do not follow this up then we are unable to understand the requirement.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 9 of 12
Occasional Contributor

Re: Blind Transfer missing from UC5.3.0

In the pre 5.3 versions we were able to use the hard transfer button for attended transfers and create a softkey with a macro(efk) to do one-button blind transfers.  Is there a way to create a macro(efk) to perform a blind transfer in 5.4.3+?

Message 10 of 12