Plantronics + Polycom. Now together as Poly Logo

Busy lamp field call information from other lines

Occasional Visitor

Busy lamp field call information from other lines

Hi,

 

I have a polycom VVX411 and the busy lamp fields shown are working fine, I can pickup calls and see statuses etc, but I can't see any information about who is calling the busy lamp field lines. On other phones in my organisation calls going through to other people/lines will appear showing who is being called and by who.

 

This means every time I pick up a call I'm doing so blindly and aren't sure whether the call is internal or not, or from a hunt group etc.

 

I can't see any settings on the phone that would address this - does anyone have any suggestions?

Message 1 of 4
3 REPLIES 3
Polycom Employee & Community Manager

Re: Busy lamp field call information from other lines

Hello @phoneuser19 ,

 

Welcome to the Poly Community.

Both the communities Must Read First and the FAQ reference the basic minimum information a new or follow up post should contain.

This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.

As a reminder the basic information asked for:

 

  • Provide the exact Software Version of your Phone
  • Provide the Phone Model
  • Provide the Call Platform (aka openSIP,Teams, Skype for Business Online, Skype for Business on Premise, Lync)
  • Provide details if UC / SIP or ObiEdition
  • Additional Poly Infrastructure (RPRM,PDMS or BToE)
  • If applicable provide a backup of the phone in question

UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup. Please rename into .TXT or Zip the file to attach.
Since UC Software 5.9.0 simply provide this via the Web Interface Diagnostics > Download Support Information Package

  • If possible provide a Log and either attach them or use the Code Tag.Consult the Troubleshooting Section found within the FAQ if applicable
  • If possible provide the MAC Address or Serial of the device
  • Provide details for example if the issue is a day 1 issue or only happened after an upgrade or any other relevant details
  • For questions around Support please check here

 

Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Poly to have an overview of the current software used. In addition, providing all details at the same time allow us to check logs or look up potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.


Please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up posts.

 

Nov 4, 2011 Question: How can I setup a Busy Lamp Field / BLF with an Digium Asterisk SIP Server?

Resolution: Please check => here <=

 

The above faq explains what we should see depending on the BLF type used by the phone.


In order to raise a support ticket, you need to work with your Poly reseller as they may need to do this for you.

End Customers are usually unable to open a ticket directly with Poly support.

If this is some sort of an Internet discounter providing your MAC address or your Poly devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Poly device from.

If the unit is no longer within the warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 4
Occasional Visitor

Re: Busy lamp field call information from other lines

Thanks for the information. Here are some more details

 

  • Software version: 5.4.1.17954
  • Phone model: VVX411
  • Call Platform: TIPT
  • SIP
Message 3 of 4
Polycom Employee & Community Manager

Re: Busy lamp field call information from other lines

Hello @phoneuser19 ,

 

Simply not enough details. Your software is outdated. The latest is UC Software 6.0.0 or 5.9.3

 

The community would need to see a backup of your configuration and/or maybe a SIP trace to comment. The linked FAQ has plenty of troubleshooting tips already.

 

If nobody else comments please open a support ticket via your reseller.


Please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up posts.

In order to raise a support ticket, you need to work with your Poly reseller as they may need to do this for you.

End Customers are usually unable to open a ticket directly with Poly support.

If this is some sort of an Internet discounter providing your MAC address or your Poly devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Poly device from.

If the unit is no longer within the warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 4