Plantronics + Polycom. Now together as Poly Logo

CX Phones & "standard" IP calls.

SOLVED
Highlighted
Trusted Contributor

CX Phones & "standard" IP calls.

Partner connect site is just sending me around in circles when I try & chat so sorry if I''m abusing this short cut.

An Imago Partner is looking for an IP Phone that integrates well with Lync 2010/13 & does SIP/VoIP too.  I understood the CX were Lync only.

Message 1 of 2
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Polycom Employee & Community Manager

Re: CX Phones & "standard" IP calls.

Hello Pete,

 

CX phones are LYNC only and cannot be used on any other call platform.

 

A VVX or other phones listed => here <= can do LYNC or SIP.

 

At present, to my knowledge, we do not support both in parallel.

 

Regards

 

Steffen

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: CX Phones & "standard" IP calls.

Hello Pete,

 

CX phones are LYNC only and cannot be used on any other call platform.

 

A VVX or other phones listed => here <= can do LYNC or SIP.

 

At present, to my knowledge, we do not support both in parallel.

 

Regards

 

Steffen

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 2