Plantronics + Polycom. Now together as Poly Logo

CX100 Static with HP 2740P

Highlighted
Occasional Visitor

CX100 Static with HP 2740P

Hi All,

 

I have a Lync implementation and on the HP 2740p I am getting static when I connect a voice call. I have the defaults set to the cx100, in Lync and in control panel sounds (OS is WIN XP SP3)

 

thx

 

Jim

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee

Re: CX100 Static with HP 2740P

Jim,

 

I have a couple CX100s I have used for years (even before going Polycom) with OCS and now Lync and have always had excellent audio quailty.  If you are seeing this only on a single unit then I'd guess that the device may physically be at fault.

 

Can you test by setting it as the default computer audio device and see if all audio playback (not just Lync sounds/calls) is affected? 

-----------
Jeff Schertz - Principal Microsoft Solutions Architect [Blog]

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Message 2 of 2