CX5500 with 1.1.2 through 1.1.6 (the slowness is across all versions tested). Out of the box config with just a few settings the unit boots in around 90 seconds. When I take the same config and switch over to use https for the provisioning server (adding 4 settings), the CX boot takes sometimes over 20 minutes with cycling black and red screens multiple times. It is the oddest thing. What logs can I turn on to troublshoot to see what might be the problem?
I can only urge you to raise this with your Polycom reseller so our support team can analyze the logs.
If you fail to identify your reseller please provide me with a serial number of one of the affected units.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels. Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's