Plantronics + Polycom. Now together as Poly Logo

CX600 losing menus options

Occasional Visitor

CX600 losing menus options

After a while of being plugged in to the system some of the CX600 phones we have deployed lose options like 'transfer call".  After power cycling the phone this remedies itself.

 

Does anyone know what may be causing this?

Message 1 of 3
2 REPLIES 2
Polycom Employee & Community Manager

Re: CX600 losing menus options

Hello JOstetrholt,

 

is the issue easily to reproduce?

Does it appear after a certain Time Period?

What Software Version is installed on the Handset?

What Software Upgrades have you installed on the LYNC Environment?

 

I remember a case where the automatic Lock/PIN after 1h would affect the Phone as it would automatically lock the Handset and the transfer Button etc. would disappear.

 

Best Regards

 

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 3
Highlighted
Polycom Employee

Re: CX600 losing menus options

This may be a side-effect of disabling the Device Lock policy in Lync on Lync Phone Edition devices runnings firmware older than CU2 (4.0.7577.2xx).  This was a known bug in earlier release of the device software.

 

For details on upgrading to the latest version of the Lync software see this blog article:

http://blog.schertz.name/2011/01/updating-lync-phone-edition-devices/

-
Jeff Schertz - Microsoft Solutions Architect [Blog]
Message 3 of 3