Plantronics + Polycom. Now together as Poly Logo

Change Default Call List Polycom VVX450 Ver 6.1.1.2670

brianolson
Visitor

Change Default Call List Polycom VVX450 Ver 6.1.1.2670

Greetings I am trying to change the default call list from missed to all calls on the Polycom VVX450 UC Ver 6.1.1.2670. If any one could help it would be much appreciated.

Message 1 of 2
1 REPLY 1
SteffenBaierUK
Polycom Employee & Community Manager

Re: Change Default Call List Polycom VVX450 Ver 6.1.1.2670

Hello @brianolson ,

 

Welcome to the Poly Community.

From the Admin Guide >here<:

 

Use the following parameters to configure call lists.

callLists.collapseDuplicates
Lync Base Profile – 0 (default)

Generic Base Profile – 1 (default)

1 – Consecutive incomplete calls to/from the same party and in the same direction are collapsed into one record in the calls list. The collapsed entry displays the number of consecutive calls.

0 – Each call is listed individually in the calls list.

callLists.logConsultationCalls
Lync Base Profile – 1 (default)

Generic Base Profile – 1 (default)

0 – Consultation calls not joined into a conference call are not listed as separate calls in the calls list.

1 – Each consultation calls is listed individually in the calls list.

feature.callList.enabled
1 (default) - Allows you to enable the missed, placed, and received call lists on all phone menus including the Home screen and dial pad.

0 - Disables all call lists.

feature.callListMissed.enabled
0 (Default) - The missed call list is disabled.

1 - The missed call list is enabled.

To enable the missed, placed, or received call lists, feature.callList.enabled must be enabled.

feature.callListPlaced.enabled
0 (Default) - The placed call list is disabled.

1 - The placed call list is enabled.

To enable the missed, placed, or received call lists, feature.callList.enabled must be enabled.

feature.callListReceived.enabled
0 (Default) - The received call list is disabled.

1 - The received call list is enabled.

To enable the missed, placed, or received call lists, feature.callList.enabled must be enabled.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2