Plantronics + Polycom. Now together as Poly Logo

Configuring Polycom IP330 on FreePBX: softkey question

GSoucy
Occasional Contributor

Configuring Polycom IP330 on FreePBX: softkey question

Hello,

 

I asked this question on community.freepbx.com but I got no reply.

 

SIP Software Version3.3.5.0247

 

  • FreePBX 15.0.16.81
  • Asterisk 16.15.1
  • Sangoma EndPoint Manager 15.0.27.43
  • SoundPoint IP330

I am updating an old FreePBX system and I got most of it working except for a few small things. The phones connects and get provisioned ok but I cannot  reprogram the 3 horizontal softkeys as they were in the old system. 

 

To start with, even when I do not configure any softkey, I get one defined in "idle" , the label is "Msgs".When I click on it, I see this:

 

** Messages

1 Message Center....

 

But it hangs, it does not seem to work.

 

In the old system, I had 3 softkeys defined:  "Msgs"    "Callers"    "Dir"   

 

"Msgs" was a speed dial for *97. 

"Callers" used to showsthe list of calls received on the phone . I dont know how it was programmed.

"Dir"  seemed to be a speed dial for 411.

 

When I define a softkey in the endpoint module for the 1st softkey, it actually appears on the second softkeys on the phone and the first one remains defined with "Msgs" as described above.

 

How can i remove the apparently useless "Msgs" softkey that appears on the 1st softkey on the new system?

 

How can I program the "Callers"  (list of calls) that I had in the old system ? 

 

Note that I am not able to program the speed dial type of actions ("Msgs" and "Dir") but I cannot program the "Callers" one. And, even if I program those actions, the default "Msgs" stays there on the first softkey.

 

To summarize:

 

==========================================================

Old System:

"Msgs"     "Callers"      "Dir"

==========================================================

New System:

"Msgs"              (same label as the old system but different action)

==========================================================

 

How can I recover the sofkeys that I had in the old system ?

 

Thank you !

 

Gilbert

 

 

 

Message 1 of 3
2 REPLIES 2
SteffenBaierUK
Polycom Employee & Community Manager

Re: Configuring Polycom IP330 on FreePBX: softkey question

Hello @GSoucy ,

 

Welcome to the Poly Community.


The SoundPoint Family is end of life since 2019 so I can only refer you to this:

 

Nov 25, 2011 Question: How can I change the functionality of a softkey button/use EFK?

Resolution: Please check => here <=

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 3
GSoucy
Occasional Contributor

Re: Configuring Polycom IP330 on FreePBX: softkey question

I was finally able to create an action string to do what I want.

 

GSoucy_0-1626176957473.png

 

This doc is useful but far from being complete. There is not description of the features, we need to guess from the name or test them. Also the actual syntax also needs to be guessed. I put my settings in hope to help others trying to do the same thing. 

 

In my case, I dont care that IP330 are deprecated, we are gradually going to all-soft-phone. Soon, we will not have any physical phone .

 

Message 3 of 3