Plantronics + Polycom. Now together as Poly Logo

Cutstomize a Web access port for each phone

Occasional Visitor

Cutstomize a Web access port for each phone

Before I pose the question, I just want to post what my goal is. I want to be able to access polycom VVX phones from the WAN into a LAN. I  can access one phone by  using port forward through a cable modem using either Http or Https port 80 directed to a phone. The I can pull up the browser for administratioon,etc

Is there anyway to customize the port for a given phone for web administration?

For instance,

Phone 1   port 1234

Phone 2  port 1235

Phone 3  port 1236

etc. This woulld allow me to input Port Forwarding rules that from the WAN I could do a XXX.XXX.XXX.XXX:1235 and get to the phone?

Are therre any other options that  would allow me to remotely access the phones from the WAN using the Web browser?


Message 1 of 2
Polycom Employee & Community Manager

Re: Cutstomize a Web access port for each phone

Hello paubrecht,

welcome to the Polycom Community.

I suggest you look at the httpd.cfg.port and httpd.cfg.secureTunnelPort parameters described in the Admin Guide.


Have a look => here <= as you may be able to utilzie / rework some of my scripts there.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.


Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2