Plantronics + Polycom. Now together as Poly Logo

DND icon does not persist through a reboot

Frequent Visitor

DND icon does not persist through a reboot

VVX500 and VVX310 Phones

 

UC Software Version 5.8.0.12848 Updater Version

5.9.5.13643

 

Running Asterisk 13/Freepbx 13 system.

 

Background of issue:

 

As a workaround for server side DND, I have the following settings on the phones to disable the built in DND softkey that simply bypasses calls to VoiceMail, and sends feature code command *76, then set the DND icon on the phone's LCD screen to show that DND is enabled: 

 

<feature feature.enhancedFeatureKeys.enabled="1"  softkey.feature.mystatus="0" homeScreen.application.enable="0" efk.softkey.alignleft="1"/>
<dnd feature.enhancedFeatureKeys.enabled="1" softkey.feature.doNotDisturb="0" />
<softkey softkey.3.action="$FDoNotDisturb$^*76$Tinvite$" softkey.3.enable="1" softkey.3.label="DND">
    <softkey.3.use softkey.3.use.idle="1" />
</softkey>

However, we're finding that the phone's DND icon can easily be cleared/reset, so that the phone's icon and what's set on the server become out of sync and is confusing. I've noticed that this occurs when the phone reboots, for instance. It also seems (according to end users) that the icon has reset to normal over night regardless of a reboot.

Is there a way to have the DND icon persist through a reboot? 
I'm thinking similar to persist volume
eg:

<Volume voice.volume.persist.handset="1"/>

But for DND?

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: DND icon does not persist through a reboot

Hello @WZKDS ,

 

welcome to the Polycom Community.


You would need Server Based DND for this to work as the phone would not store the DND state over a reboot.

 

Jun 07, 2012 Question: How can I add a server based DND / Do not disturb and / or Call Forward?
Resolution: Please check => here <=

 

The above FAQ was created as people asked for similar features but I assume nobody in the open source Digium community showed any interest.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2