Plantronics + Polycom. Now together as Poly Logo

Dialpad for GTM calls is not working

SOLVED
craig.taylor
Occasional Contributor

Dialpad for GTM calls is not working

Our Polycom is running firmware version 5.5.4.2255 and it is a trio 8800. We have line 1 configured for Skype for Business and line 2 configured to connect to our Mitel phone system. When we make a call to a Go To Meeting number and then enter in the GTM access code the automated GTM auto-attended says that we haven't entered in any numbers, even though with have using the Dialpad on the phone.

Message 1 of 3
1 ACCEPTED SOLUTION

Accepted Solutions
SteffenBaierUK
Polycom Employee & Community Manager

Re: Dialpad for GTM calls is not working

Hello @craig.taylor,

welcome to the Polycom Community.

The community's VoIP FAQ contains this post here:

Oct 7, 2011 Question: Phone unable to send DTMF to an IVR system or how to troubleshoot DTMF issues

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 3
2 REPLIES 2
SteffenBaierUK
Polycom Employee & Community Manager

Re: Dialpad for GTM calls is not working

Hello @craig.taylor,

welcome to the Polycom Community.

The community's VoIP FAQ contains this post here:

Oct 7, 2011 Question: Phone unable to send DTMF to an IVR system or how to troubleshoot DTMF issues

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 3
craig.taylor
Occasional Contributor

Re: Dialpad for GTM calls is not working

Applying the dtmf_payload_127.cfg file resolved the issue thanks.

Message 3 of 3