Plantronics + Polycom. Now together as Poly Logo

Digitmap to dial only extension 1001

Advisor

Digitmap to dial only extension 1001

Hi Polycom

 

Hoping someoine can help me out with a batch of Polycom VVX301

 

UC Software Version 5.8.1.7278
Updater Version 5.9.6.8818

 

Is there a way using provisioning to tell the Digitmap it can only dial extension 1001?

 

I was hoping it would be easy as <dialplan dialplan.digitmap="1001" but users can still dial 1008, 2008 and so forth

 

I want it setup that if users dial 1002, 3002 etc it will be disabled where as if users dial 1001 the call goes through.

 

 

Message 1 of 3
2 REPLIES 2
Polycom Employee & Community Manager

Re: Digitmap to dial only extension 1001

Hello @Paddy ,

 

Welcome back to the Poly Community.

Please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up posts.

Oct 7, 2011 Question: Phone unable to Dial a number when Off Hook or on 2nd Call in a Conference or Digitmap issues

Resolution: Please check => here <=

 

The above explains in detail what you can do with a digitmap but I believe it should not be the responsibility of the phone to decide what it can call or not.

 

The Digitmap can only manipulate the digits entered depending on the state aka off-hook or on hook.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 3
Frequent Advisor

Re: Digitmap to dial only extension 1001

Hi Paddy,

as Steffen said the dial out restrictions should be configured on your IP PBX/HBPX, not in the digit map.

The digit map is for off-hook dialling and immediately dials out pre-defined dial strings without the need of pressing the dial key or # after entering the number and is usually configured according to country specific number plans (external calls) and corporate extensions (internal calls).

 

Polycom's SPIP/SSIP/VVX/Trio digit maps are using a string compatible with the digit map feature of MGCP described in 2.1.5 of RFC 3435.

 

Check also the VVX admin guide:
Digit maps are defined by a single string or a list of strings. If a dialed number matches any string of a digit map, the call is automatically placed. If a dialed number matches no string—an impossible match—you can specify the phone's behavior. If a number ends with #, you can specify the phone's behavior, called trailing # behavior. You can also specify the digit map timeout, the period of time after you dial a number that the call is placed. The configuration syntax of the digit map is based on recommendations in section 2.1.5 of RFC 3435.

 

BR

Chris

Message 3 of 3