Don't want a line to register

[ewieling1]

I have a VVX 410 with a line which I do NOT want to register, but the phone continues to complain about the line not being registered. Here is the polycom config with the not-relevant items removed. 

reg.6.auth.userId="ewie_XXX5134673" reg.6.address="ewie_XXX5134673" reg.6.label="XXX-513-4673" reg.6.auth.password="mypassword" reg.6.lineKeys="1" reg.6.callsPerLineKey="1" reg.6.server.1.address="outbound.bobdobbs.net" reg.6.server.1.register="0" />

[SteffenBaierUK]

Hello ewieling1,

welcome to the Polycom Community.

It is always useful to include the currently used software version as issues experienced may already be addressed in a newer release.

This also allows yourself and others to check against current software release notes.

Therefore the Polycom VoIP FAQ contains this post here:

Question: How can I find out my SIP UC Software Version or the BootROM Version of my Phone?
Resolution: Please check here

In addition the reg.x.server.y.register parameter are for SIP Server Fallback Enhancements so I do not believe this is what you are after.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services