Plantronics + Polycom. Now together as Poly Logo

Dual dialone tone issue

SOLVED
ZanKristof
Occasional Contributor

Dual dialone tone issue

Hi

 

I want to disable the dialing tone from IP331 phones. How can I do it?

 

Thanks

Christophe

Message 1 of 3
1 ACCEPTED SOLUTION

Accepted Solutions
SteffenBaierUK
Polycom Employee & Community Manager

Re: Dual dialone tone issue

Hello Christophe,

As usual the community's VoIP FAQ contains a lot of useful information like this post here:

 

Nov 23, 2011 Question: How can I change my Dial Tone or Call Progress Tones to sound like my local Dial Tone?

Resolution: Please check => here <=

 

Above explains how you can manipulate the call progress tones etc. and may enable you to lower the volume to a zero value or similar to archive what you are after.

 

I am not aware of a way to simply disable the dial tone and would not know why you would need to do this.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 3
2 REPLIES 2
SteffenBaierUK
Polycom Employee & Community Manager

Re: Dual dialone tone issue

Hello Christophe,

As usual the community's VoIP FAQ contains a lot of useful information like this post here:

 

Nov 23, 2011 Question: How can I change my Dial Tone or Call Progress Tones to sound like my local Dial Tone?

Resolution: Please check => here <=

 

Above explains how you can manipulate the call progress tones etc. and may enable you to lower the volume to a zero value or similar to archive what you are after.

 

I am not aware of a way to simply disable the dial tone and would not know why you would need to do this.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 3
ZanKristof
Occasional Contributor

Re: Dual dialone tone issue

Thanks for the quick answer. Its what i was looking for.

I will handle all the progress tone from my media gateway.

Message 3 of 3