Plantronics + Polycom. Now together as Poly Logo

Enable IP 650 for uaCSTA and CTI

Occasional Visitor

Enable IP 650 for uaCSTA and CTI

We are an application developer firm that concentrates on making phones accessible to the vision and mobility impaired. Our application makes phones accessible to these individuals via CTI. 



1. How do I enable the IP 650 to support uaCSTA or how do I verify it is setup to support uaCSTA

2. Are there any drivers available that will give our TAPI based application access to the IP 650?


About my phone:

UC Software Version BootROM Software Version

Message 1 of 2
Polycom Employee & Community Manager

Re: Enable IP 650 for uaCSTA and CTI

Hello accessaphone,

Welcome to the Polycom community.

The FAQ contains a post covering such functionality.

I am not near a PC and uaCSTA support on our phones is only very limited and old development and for more details your Polycom reseller and/or Polycom support should be consulted.

In addition UCS 4.1.0 for the SoundStation 650 is for LYNC support only so if you have a Sip server you should run the latest UCS 4.0.4 at present.

Best regards

Steffen Baier

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2