• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
HP Recommended

Hello,

I'm trying to configure my VVX/Trio phones working in Generic SIP mode (ver: 6.4.1.2280) to send the switch MAC address & Port ID to server in SIP REGISTER request ('X-switch-info' header).

I've set below, but see nothing in REGISTER message.

feature.E911.enabled="1"
locInfo.source="LLDP" 

 

Expected to a similar behavior like with Yealink phones, am I missing something?

image

 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hello @alexxst ,

 

I have since then looked into this and it seems you only need to enable the following for the phone to send the x-switch-info in its register message:

 

<web voIpProt.SIP.header.switchInfo.enable="1"/>

 

I am getting a Doc Bug raised as I believe the Admin guide states this should be enabled by default.

 

Enabling this will send the register message with the Switch Port. To my own personal knowledge, this was added for our Partner Zoom. 

 

Any issues, if you are not using Zoom, for the supported use case please follow this up as explained via our support organisation.

 

0118200700|sip  |0|00|>>> Data Send to 172.21.177.17:5060
0118200700|sip  |0|00|    REGISTER sip:172.21.177.17 SIP/2.0
0118200700|sip  |0|00|    Via: SIP/2.0/UDP 10.252.149.59;branch=z9hG4bK9ba9ab27482E408A
0118200700|sip  |0|00|    From: "3034" <sip:3034@172.21.177.17>;tag=94836B96-4838D646
0118200700|sip  |0|00|    To: <sip:3034@172.21.177.17>
0118200700|sip  |0|00|    CSeq: 61 REGISTER
0118200700|sip  |0|00|    Call-ID: c9464b584d17bbebf611b62d4ff2b007
0118200700|sip  |0|00|    Contact: <sip:3034@10.252.149.59>;methods="INVITE,ACK,BYE,CANCEL,OPTIONS,INFO,MESSAGE,SUBSCRIBE,NOTIFY,PRACK,UPDATE,REFER"
0118200700|sip  |0|00|    User-Agent: PolyCCX-CCX_400-UA/7.2.0.12360
0118200700|sip  |0|00|    Accept-Language: en
0118200700|sip  |0|00|    X-switch-info: mac=50:06:ab:92:4b:00,port=Fa0/8
0118200700|sip  |0|00|    Authorization: Digest username="3034", realm="asterisk", nonce="3e8748d3", uri="sip:172.21.177.17", response="0925a48212d7f935c4cb1a9f6482b5c4", algorithm=MD5
0118200700|sip  |0|00|    Max-Forwards: 70
0118200700|sip  |0|00|    Expires: 3600
0118200700|sip  |0|00|    Content-Length: 0
0118200700|sip  |0|00|    
0118200700|sip  |0|00|<<< End of data send

 

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

 

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN

View solution in original post

3 REPLIES 3
HP Recommended

Hello @alexxst ,

 

Welcome to the Poly Community. Pictures inside the topic need to be approved by a moderator before they appear.

 

From our latest 6.4.0 Admin Guide >here<

 

  • feature.E911.enabled
    0 (default) - Disable the E.911 feature.

    1 - Enable the E.911 feature.

    The INVITE sent for emergency calls from the phone includes the geolocation header defined in RFC 6442 and PIDF presence element as specified in RFC3863 with a GEOPRIV location object specified in RFC4119 for in Open SIP environments.

I would only expect an INVITE to include this.

 

If you still believe we are violating an RFC or there is a bug please go ahead and open a support ticket in your region and/or if the phone is out of warranty our team should explain to you who to contact to pay for PPI/PayPerIncident support.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

 

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
HP Recommended

Hello @alexxst ,

 

I have since then looked into this and it seems you only need to enable the following for the phone to send the x-switch-info in its register message:

 

<web voIpProt.SIP.header.switchInfo.enable="1"/>

 

I am getting a Doc Bug raised as I believe the Admin guide states this should be enabled by default.

 

Enabling this will send the register message with the Switch Port. To my own personal knowledge, this was added for our Partner Zoom. 

 

Any issues, if you are not using Zoom, for the supported use case please follow this up as explained via our support organisation.

 

0118200700|sip  |0|00|>>> Data Send to 172.21.177.17:5060
0118200700|sip  |0|00|    REGISTER sip:172.21.177.17 SIP/2.0
0118200700|sip  |0|00|    Via: SIP/2.0/UDP 10.252.149.59;branch=z9hG4bK9ba9ab27482E408A
0118200700|sip  |0|00|    From: "3034" <sip:3034@172.21.177.17>;tag=94836B96-4838D646
0118200700|sip  |0|00|    To: <sip:3034@172.21.177.17>
0118200700|sip  |0|00|    CSeq: 61 REGISTER
0118200700|sip  |0|00|    Call-ID: c9464b584d17bbebf611b62d4ff2b007
0118200700|sip  |0|00|    Contact: <sip:3034@10.252.149.59>;methods="INVITE,ACK,BYE,CANCEL,OPTIONS,INFO,MESSAGE,SUBSCRIBE,NOTIFY,PRACK,UPDATE,REFER"
0118200700|sip  |0|00|    User-Agent: PolyCCX-CCX_400-UA/7.2.0.12360
0118200700|sip  |0|00|    Accept-Language: en
0118200700|sip  |0|00|    X-switch-info: mac=50:06:ab:92:4b:00,port=Fa0/8
0118200700|sip  |0|00|    Authorization: Digest username="3034", realm="asterisk", nonce="3e8748d3", uri="sip:172.21.177.17", response="0925a48212d7f935c4cb1a9f6482b5c4", algorithm=MD5
0118200700|sip  |0|00|    Max-Forwards: 70
0118200700|sip  |0|00|    Expires: 3600
0118200700|sip  |0|00|    Content-Length: 0
0118200700|sip  |0|00|    
0118200700|sip  |0|00|<<< End of data send

 

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

 

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
HP Recommended

Thanks SteffenBaierUK - that's exactly what I looked for.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.