Plantronics + Polycom. Now together as Poly Logo

Error 400 on loading MAC.cfg

Advisor

Error 400 on loading MAC.cfg

Hi I am trying to provision polycom 650 with 3.2.7 via HTTPS.

 

I am getting "config file error" and server side I see tha the phone is only trying to download MAC.cfg and getting 400 error:

 

1.2.3.4 - - [05/Jun/2013:21:42:34 -0400] "GET /p/0804/0004f21ffbd1.cfg HTTP/1.1" 400 4495 "-" "FileTransport PolycomSoundPointIP-SPIP_650-UA/3.2.7.0198"

 Her is the 0004f21ffbd1.cfg file:

 

<?xml version="1.0" standalone="yes"?>
<!-- Default Master SIP Configuration File-->
<!-- For information on configuring Polycom VoIP phones please refer to the -->
<!-- Configuration File Management white paper available from: -->
<!-- http://www.polycom.com/common/documents/whitepapers/configuration_file_management_on_soundpoint_ip_p... -->
<!-- $RCSfile$  $Revision: 128085 $ -->
<APPLICATION APP_FILE_PATH="sip.ld" CONFIG_FILES="x23.cfg, phone1.cfg, sip.cfg" MISC_FILES="" LOG_FILE_DIRECTORY="" OVERRIDES_DIRECTORY="" CONTACTS_DIRECTORY="" LICENSE_DIRECTORY="">
<APPLICATION_VVX1500 CONFIG_FILES_VVX1500="phone1.cfg, sip.cfg"/>
<!-- Change sip_vvx1500.cfg to sip_vvx1500_H323.cfg to enable H.323 if so licensed -->
<APPLICATION_SPIP300 APP_FILE_PATH_SPIP300="sip_213.ld" CONFIG_FILES_SPIP300="phone1_213.cfg, sip_213.cfg"/>
<APPLICATION_SPIP500 APP_FILE_PATH_SPIP500="sip_213.ld" CONFIG_FILES_SPIP500="phone1_213.cfg, sip_213.cfg"/>
<APPLICATION_SPIP301 APP_FILE_PATH_SPIP301="sip_318.ld" CONFIG_FILES_SPIP301="phone1_318.cfg, sip_318.cfg"/>
<APPLICATION_SPIP501 APP_FILE_PATH_SPIP501="sip_318.ld" CONFIG_FILES_SPIP501="phone1_318.cfg, sip_318.cfg"/>
<APPLICATION_SPIP600 APP_FILE_PATH_SPIP600="sip_318.ld" CONFIG_FILES_SPIP600="phone1_318.cfg, sip_318.cfg"/>
<APPLICATION_SPIP601 APP_FILE_PATH_SPIP601="sip_318.ld" CONFIG_FILES_SPIP601="phone1_318.cfg, sip_318.cfg"/>
<APPLICATION_SSIP4000 APP_FILE_PATH_SSIP4000="sip_318.ld" CONFIG_FILES_SSIP4000="phone1_318.cfg, sip_318.cfg"/>
</APPLICATION>

 Please advise what can be wrong

Message 1 of 4
3 REPLIES 3
Valued Contributor

Re: Error 400 on loading MAC.cfg

what was the source of provising,manual or automatic and what staus is showing at CMA for the same??

 

 

Regards

 

Yash Pal

BR
Yash
Message 2 of 4
Polycom Employee & Community Manager

Re: Error 400 on loading MAC.cfg

@Yashpal,

 

this is a VoIP Subforum and not in any way connected to the CMA infrastructure. Please check this before replying to a post.

 

@Nikita

 

change your CURL log level on the phone to debug and repeat the test. In addition check your Server logs.

 

Best Regards

 

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 3 of 4
Highlighted
Advisor

Re: Error 400 on loading MAC.cfg

log.render.level is set to "1". But PUT method is not allowed on provisioning server for security reasons.

So I manually typed in 

LOG_FILE_DIRECTORY="ftp://username:password@1.2.3.4"

 

in mac.cfg. But the phone is not uploading logs via FTP for some reason. Dropping log files via FTP work for all my phones except this one.

 

Please advise.

Message 4 of 4