Plantronics + Polycom. Now together as Poly Logo

[FAQ] Finding the default values for configuration parameters for Polycom Phones

Highlighted
Polycom Employee & Community Manager

[FAQ] Finding the default values for configuration parameters for Polycom Phones

Polycom does not always release a new Administrator Guide for every individual UC Software Release.

 

Newly introduced Parameters are usually included within the Software accompanying Software Release notes.

 

It may be desirable to verify the standard values or the minimum and maximum values for any configuration Parameter.

 

Since the introduction of UC Software 3.3.0 the \Config Subdirectory included in a downloaded Software from the Polycom support Page => here <= contains a file called polycomConfig.xsd

 

Default.JPG

 

The above file holds the definition of all available parameters and their values

 

Example parameter voice.rxQos.avgJitter

 

xsd:attribute name="voice.rxQos.avgJitter" type="UInt_0_80">
  <xsd:annotation><xsd:documentation>number min 0 max 80 default 20.</xsd:documentation></xsd:annotation>
</xsd:attribute>

 

More details on XSD can be found => here <=

 

Since UC Software 4.0.0 the Web Interface itself also shows the parameters within the Field Help section:

 

ConfigParameterFieldHelp_00.png

 

The above shows the reg.1.protocol.SIP parameter.

 

LocalHelp.PNG

 

The above illustrates the SNTP Server parameter actually being device.sntp.serverName shown in the "special" Device Parameter => here <=

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 1 of 1