Plantronics + Polycom. Now together as Poly Logo

[FAQ] Finding the default values for configuration parameters for Polycom Phones

Polycom Employee & Community Manager

[FAQ] Finding the default values for configuration parameters for Polycom Phones

Polycom does not always release a new Administrator Guide for every individual UC Software Release.


Newly introduced Parameters are usually included within the Software accompanying Software Release notes.


It may be desirable to verify the standard values or the minimum and maximum values for any configuration Parameter.


Since the introduction of UC Software 3.3.0 the \Config Subdirectory included in a downloaded Software from the Polycom support Page => here <= contains a file called polycomConfig.xsd




The above file holds the definition of all available parameters and their values


Example parameter voice.rxQos.avgJitter


xsd:attribute name="voice.rxQos.avgJitter" type="UInt_0_80">
  <xsd:annotation><xsd:documentation>number min 0 max 80 default 20.</xsd:documentation></xsd:annotation>


More details on XSD can be found => here <=


Since UC Software 4.0.0 the Web Interface itself also shows the parameters within the Field Help section:




The above shows the reg.1.protocol.SIP parameter.




The above illustrates the SNTP Server parameter actually being device.sntp.serverName shown in the "special" Device Parameter => here <=

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 1 of 1