Plantronics + Polycom. Now together as Poly Logo

[FAQ] How can I add capital Letters on a SPIP32x, or SPIP33x in the middle of a authentication?

Polycom Employee & Community Manager

[FAQ] How can I add capital Letters on a SPIP32x, or SPIP33x in the middle of a authentication?

The SPIP320, SPIP321, SPIP330, SPIP331 and SPIP335 only offer the Abc, abc or 123 input mode.

 

This is as designed and the following workaround can be used if a Username or Password containing a capital Letter after the first letter like SuperUser is needed to be added.

 

SPIP32x_33x_CapitalLetterABC_Abc_01.png 

 

Once the First letter has been added in capitals the Phone automatically switches to lower case mode.

 

SPIP32x_33x_CapitalLetterABC_Abc_02.png

 

the new added character is shown as lower case

 

SPIP32x_33x_CapitalLetterABC_Abc_03.png

 

When the Arrow Up / Navigation Up Key is pressed straight after adding the new Character it will automatically change into a capital character.




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 1 of 1