The Poly Trio and Visual+ follow the same provisioning methods outlined => here <=
In addition, the unit can be configured or upgraded using a FAT32 formatted memory stick.
The example content of the USB Stick could be:
Simply update the configuration or the UC Software whilst the phone is already running.
Upgrade UC Software and provision the phone with Speed Dials using a USB Stick in the Unit when powering the Phone on or rebooting the phone
The TrioExampleConfiguration.zip contains the above mentioned files (no firmware attached). Unzip on a USB Memorystick to utilize the above example.
<VisualPlusPair mr.pair.uid.1="MAC_ADDRESS_OF_VISUAL+" />
Add the above to the trio.cfg file in order to automatically pair the Visual+ with the Trio
<Bluetooth bluetooth.devName="TrioBluetooth" bluetooth.radioOn="1" />
Add the above to the trio.cfg file in order to automatically enable the Bluetooth Radio and call the unit TrioBluetooth.
Visual+ USB Provisioning
A Visual+ unit can also be provisioned via the USB method but it must be in a un-paired state to do so
If not paired simply plug the USB Stick into the Visual+ and tap the pairing button when tasked
Setting a Manual IP Address for the Visual+
You can browse to the Web Interface of the Visual+ and change DHCP to disable.
Download the attached VisualPlus_Manual_IP_Address.zip and unzip the file.
The 000000000000.cfg uses
The <MAC>_ManualIP.cfg contains:
<manual device.set="1" device.dhcp.enabled.set="1" device.dhcp.enabled="0" device.net.ipAddress.set="1" device.net.ipAddress="126.96.36.199" device.net.subnetMask.set="1" device.net.subnetMask="255.255.255.0" device.net.IPgateway.set="1" device.net.IPgateway="188.8.131.52" device.dns.serverAddress.set="1" device.dns.serverAddress="184.108.40.206"/>
In order to set the Visual+ to not utilize the RealPresence Trio as a provisioning server this parameter can be used:
An example can be found => here <=
Capturing Logs via a USB Stick:
The Trio or Visual+ will recongize the stick and prompt (Trio only) the user to enter the Password (details => here <=).
The user will be prompted to USB Provision the Trio
A USB Icon will indicate the a stick is inserted into the Trio
Once disconnected and inserted into a compatble PC the logs can be found