Plantronics + Polycom. Now together as Poly Logo

[FAQ] Issues with the Polycom Phone since Upgrading to UC Software 3.3.0 or later

Highlighted
Polycom Employee & Community Manager

[FAQ] Issues with the Polycom Phone since Upgrading to UC Software 3.3.0 or later

UC Software 3.3.0 introduced many changes to the way the Polycom Phones are provisioned.

 

For a detailled overview of these changes please read => here <=.

 

The greatest change is that there is no longer a need for the sip.cfg / phone1.cfg

 

Any user upgrading from a SIP 3.2.x or previous Version is advised to utilize the cfcUtility from => here <= in order to automatically convert pre UC Software Parameters into their matching Parameters for UC Software 3.3.0.

 

NOTE: The tool is only converting pre UC Software Parameters to match UC Software 3.3.0 Parameters and will remove any newly manually added Parameters from UC Software > 3.3.1 or 4.0.0! 

 

UC Software 4.0.0 changed the BootROM process into the Upgrader as described => here <= 

 

An Overview of supported Phones in relation to the SIP / UC Software can be found => here <=

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 1 of 1