[FAQ] Simplified OSD inbound caller display for Polycom VVX Business Media Phones
The OSD factory default for an inbound call on a Polycom VVX Business Media Phone is to present this as a full screen information:
UC Software 5.2.2 or later added a new Parameter:
<web up.osdIncomingCall.Enabled="0" />
If the above Parameter is added the new screen layout is as follows:
---------------- The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels. Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's