Faceing isuue with the sip notify polycom-check-cfg

[Bivin VIjai]

Hi All

I am facing issue with the sip notify polycom-check-cfg <EXT> command.

I am using the same model phone (Sound Point 331) with different firmware 3.3.0.1098

and 4.1.1.0731

sip notify polycom-check-cfg <EXT> will working fine with 3.3.0.1098 firmware model and not working with 4.1.1.0731 model .

Am using the below configuration in the sip.cfg file .

<voIpProt.SIP.specialEvent.checkSync voIpProt.SIP.specialEvent.checkSync.alwaysReboot="0" />

[SteffenBaierUK]

Hello Bivin VIjai's ,

A couple of your old posts => here <= are still open / pending as you have not marked these as "Accept as a solution".

If they are in this state nobody finding them via a community search will know if an answer or advice was useful and has helped you.

Could you therefore kindly go over them and mark or answer as appropriate ?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilize the community more efficiently. 

In addition 4.1.1 is for LYNC only where 4.0.11 is for openSIP.

Are you having a configuration isssue or is the SIP NOTIFY not working?

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services