Plantronics + Polycom. Now together as Poly Logo

Firmware to Soundpoint 330 and 301

Occasional Visitor

Firmware to Soundpoint 330 and 301

I have 20 Polycom Sip 330 and 301 and I am having problems of Audit with SNMP and I think to end only with that problem modernizing Firmware, but I don't get an orientation of as you make it, somebody could help me happening where to lower the firmware and manual so that I can execute the upgrade in everybody.

Thank You.

Message 1 of 2
Polycom Employee & Community Manager

Re: Firmware to Soundpoint 330 and 301

Hello wruggi,


welcome to the Polycom Community.


Please check this document here in relation to support Legacy Phones with later Software releases.


Software for all Phones can be found here.


Best Regards


Steffen Baier

The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.


Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2