Plantronics + Polycom. Now together as Poly Logo

Firmware to Soundpoint 330 and 301

Occasional Visitor

Firmware to Soundpoint 330 and 301

I have 20 Polycom Sip 330 and 301 and I am having problems of Audit with SNMP and I think to end only with that problem modernizing Firmware, but I don't get an orientation of as you make it, somebody could help me happening where to lower the firmware and manual so that I can execute the upgrade in everybody.

Thank You.

Message 1 of 2
1 REPLY 1
Polycom Employee & Community Manager

Re: Firmware to Soundpoint 330 and 301

Hello wruggi,

 

welcome to the Polycom Community.

 

Please check this document here in relation to support Legacy Phones with later Software releases.

 

Software for all Phones can be found here.

 

Best Regards

 

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2