-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Phones
- Desk and IP Conference Phones
- Re: Guide of log codes
Create an account on the HP Community to personalize your profile and ask a question
12-06-2017 09:17 AM
Hello, good day to everyone I would like to ask for your help to know if there is a guide or some document where all the definitions of the codes that send the logs of the polycom equipment Example
1204121815|pps |4|00|ppsOnEvLocalProfileProvision(): ProvDoc is NULL 1204122015|pps |4|00
|sip |4|00|doDnsListLookup(udp): doDnsSrvLookupForARecordList 'talos.bicentel.net' found no records
Thank you so much regards
Solved! Go to Solution.
Accepted Solutions
12-06-2017 09:39 AM
Hello @J.Silva,
I stated that the answer is similar.
You can look at the logs and try and post them here and either a Polycom employee or other enthusiast may respond but there is no "official" Guide as the logs are not meant for end customers to analyze as they may confuse an end user or similar.
You logs shows a DNS issue. How about checking this with wireshark or on your DNS ?
If you have an issue and cannot resolve it you must open a ticket.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
12-06-2017 09:23 AM
Hello @J.Silva,
welcome to the Polycom Community.
A couple or all of your old posts => here <= are still open / pending as you have not marked these as "Accept as a solution" or at least provided some form of feedback or answer.
If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.
Could you therefore kindly go over them and mark or answer as appropriate ?
If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilize the community more efficiently.
In regards to the logs as already similar replied => here <=
End user cannot analyze logs as these are not meant for end user purposes.
Please open a support ticket via your POLYCOM reseller if you have a specific issue.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
12-06-2017 09:39 AM
Hello @J.Silva,
I stated that the answer is similar.
You can look at the logs and try and post them here and either a Polycom employee or other enthusiast may respond but there is no "official" Guide as the logs are not meant for end customers to analyze as they may confuse an end user or similar.
You logs shows a DNS issue. How about checking this with wireshark or on your DNS ?
If you have an issue and cannot resolve it you must open a ticket.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
Didn't find what you were looking for? Ask the community