Plantronics + Polycom. Now together as Poly Logo

I managed to brick a D60... reset not helping

Frequent Visitor

I managed to brick a D60... reset not helping

I am trying to pair a VVX500 running with a D60 base station/handset. After I realized the PC port on the VVX500 was disabled, I got it to work. But it picked up from DHCP, and I wanted to reset the D60 to static. Something about the process failed, and the the D60 seems to be bricked. Pressing reset for 7+ seconds does not help. A scan of the LAN shows it still at, but the D60 internal web server is not working, and all methods of pairing with the VVX (auto, IP, MAC, PC Port) are now failing. Is there any more radical reset than the button if you can't get to the web interface? Thank you. 

Message 1 of 2
Polycom Employee & Community Manager

Re: I managed to brick a D60... reset not helping

Hello @hochmand ,


welcome to the Poly Community.


I suggest you get this into support.

In order to raise a support ticket, you need to work with your Poly reseller as they need to do this for you.

End Customers are unable to open a ticket directly with Poly support.

If this is some sort of an Internet discounter providing your MAC address or your Poly devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Poly device from.

If the unit is no longer within warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2