Plantronics + Polycom. Now together as Poly Logo

IP 331 keeps rebooting

Erniewh597
Occasional Visitor

IP 331 keeps rebooting

We have two IP 331s that keep rebooting over and over.  They were set up on a VoIP system.  But where the office was located, the internet connection was not that good.  So the CEO has gone back to landlines.   We just go thru installing a new Fortinet 70 system. We are using IP phones so we to eliminate pulling extra wires. Every phone works fine except the Polycom IP 331s.   We have at least 10 of these.  We tried resetting back to default, but now the two we did it on keeps rebooting over and over.  Is says the (mac address)cfg failed.   Then we will another screen will say application failed.   I haven't touch the other 8 because we are scared we might screw those up too.  I hate to get rid of these because they are kind of new.  But the CEO says, if we get new phones, they will be the Talkswitch IP phones.  They went in without a problem.

Message 1 of 2
1 REPLY 1
SteffenBaierUK
Polycom Employee & Community Manager

Re: IP 331 keeps rebooting

Hello Erniewh597,

welcome to the Polycom Community.

The FAQ now contains an explanation for the (mac address)cfg failed message here:

 

Oct 10, 2012 Question: I get the error Message "error loading 00xxxxxxxxxx.cfg" and then Phone continues to reboot

Resolution: Please check => here <=

 

It also already contained below:

 

Sep 27, 2012 Question: I get the error Message “application not present” on my phones screen

Resolution: Please check => here <=


Please ensure that you provide the Phone with a Provisioning Server so it can download its configuration and software.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2