Hi
Is it possible to disable DTMF functionality on a Soundstation IP 5000 through the web interface?
Or via the phone itself?
If not, how is it done?
We don´t use config files.
Hello Thomas,
as prior reminded in your other post it is always useful to post the current software version when requesting help in the community as the answer often depends on the version used.
From the FAQ:
Oct 7, 2011 Question: Phone unable to send DTMF to an IVR system
Resolution: Please check => here <=
Oct 7, 2011 Question: Do I always need a Provisioning Server or can I configure a Phone via the Web Interface or via the Phone Gui?
Resolution: Please check => here <=
Please ensure you follow up this and your other post so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
See picture from the web browser for versions.
So it seems that we cannot change via web browser.
How will we do this then?
Hello Thomas,
above links outline that you can only load a configuration via the web browser if you are running UCS 4.x.x.
As you shown in the attached you are running UCS 3.3.x you can either update your phone or setup a provisioning server.
Both is described in the FAQ.
You may want to contact your Polycom reseller for further support.
Best Regards
Steffen Baier
Hi
Now we have the following:
UC Software Version | 4.1.0.84959 |
BootROM Software Version | 4.4.0.0080 |
on a:
Phone Model | SoundStation IP 5000 |
Part Number | 3111-30900-001 Rev:F |
Where in the webinterface is the option for disabling DTMF?
Regards,
Thomas
Hello Thomas,
as outlined already there is no button or tick box to disable DTMF.
What you can do is create a configuration file that contains the parameters to disable the DTMF functionality and import this file via the Web Interface.
Above replies already contain a link to the DTMF FAQ post that actually holds example files.
Simply just using:
<dtmf tone.dtmf.viaRtp="0"/>
would disable the standard DTMF within the RTP.
For further details please ensure to follow up with your Polycom reseller and/or Polycom support as outlined in my signature.
Best Regards
Steffen Baier
Hi
That didn´t help att all.
So we can´t still call to ex Genesys and hit *code*.
The * just opens a new line for a new call.
Haven´t anyone else had this problem?
The digitmap as stated before is used before a call not in use during a call?
Regards,
Thomas
Hello Thomas,
in fairness to all other community members who may find this post we should probably make them aware that the *code* comment is related to your original post => here <=
Changing your support object module log level to an event 3 within the Settings > Logging setting should show you if the phone uses a Digitmap in the Diagnostics > View & Download Logs section.
This is getting into Support / Troubleshooting now and as a Polycom employee I am unable to provide this via the community.
As prior suggested please raise this via your Polycom reseller and/or follow the advise in my signature.
You will need to provide a backup of your configuration, a wireshark trace via a spanned port including the phone booting up and a fresh app/boo log from a provisioning server including the start of the phone.
Best Regards
Steffen Baier