Plantronics + Polycom. Now together as Poly Logo

IP 7000 and configuration with IP Centrex

Occasional Visitor

IP 7000 and configuration with IP Centrex

Hi all,

 

I've bought an IP7000 under the assumption it would be compatible with our ISP managed PBX (IP Centrex), unfortunately turns out it isn't.

I'd really like to avoid getting stuck with a pretty looking and expensive piece of plastic. :(

 

From the PBX management portal I can generate provisioning files for the following IP phones:

 

  • ATLINKS IP600 (SIP-ADV PWD)
  • ATLINKS IP800 (SIP-ADV PWD)
  • AUDIOCODES MP102 (MGCP 1)
  • AUDIOCODES MP112 (MGCP 1)
  • CISCO 7940G (MGCP)
  • CISCO 7960 (MGCP)
  • EYEPMEDIA EYEP_COMMUNICATOR (SIP-ADV PWD 1)
  • GIGASET A510 (SIP-ADV PWD)
  • LG IP-8815 (MGCP 1)
  • LG IP-8830 (SIP-ADV PWD 1 SRT)
  • LG IP-8840 (MGCP 1)
  • SNOM 300 (SIP-ADV PWD 1)
  • THOMSON ST2030 (MGCP 1)
  • THOMSON ST2030 (MGCP 1)
  • THOMSON TB30 FW (MGCP 1)

I'm wondering if maybe one of these models has a closer configuration to what the Polycom needs and if by opening the configuration file I can translate the settings and manually provision the IP7000 to work.

 

Currently I managed to get the following settings, but as far as I know they're not sufficient to fully configure an IP phone:

call_server_address
mgc_port

sntp_server_address

 

Can anyone point me on the right track?

 

Thanks in advance!

Message 1 of 2
1 REPLY 1
Polycom Employee & Community Manager

Re: IP 7000 and configuration with IP Centrex

Hello Rici,

welcome to the Polycom Community.

The community's VoIP FAQ contains this post here:

Oct 7, 2011 Question: Can I register or is my Polycom Phone compatible with a “XYZ” SIP Server?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2