Plantronics + Polycom. Now together as Poly Logo

IP6000 and Cisco Meet-me facility

Tim_pof
Occasional Visitor

IP6000 and Cisco Meet-me facility

Hi,

Is it possible to configure an IP6000 with the cisco meet-me button ? I am using CUCM v8.6 .

Message 1 of 4
3 REPLIES 3
SteffenBaierUK
Polycom Employee & Community Manager

Re: IP6000 and Cisco Meet-me facility

Hello Tim_pof,

welcome to the Polycom Community.

 

Could you elaborate a bit more on this facility ?

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 4
Tim_pof
Occasional Visitor

Re: IP6000 and Cisco Meet-me facility

Hi Steffen

 

We have a Polycom IP6000 Soundstation we use for conference calls and is connected to our Cisco Call managers on version 8.6

 

I have been asked if it is possible to configure the IP6000 with the cisco Meet-me button. You press the meet-me button and enter the conference number ie 3050 - then other people can call 3050 and join the conference, usually no more than 6.

This is a facility our staff are used to , to host conference calls in-house and not go to a service provide. 

Rgds Tim

Message 3 of 4
SteffenBaierUK
Polycom Employee & Community Manager

Re: IP6000 and Cisco Meet-me facility

Hello Tim,

The community's VoIP FAQ contains this post here:

 

Nov 4, 2011 Question: How can I change the functionality of an Hardware Button?

Resolution: Please check => here <=

 

or

 

Nov 25, 2011 Question: How can I change the functionality of a softkey button / use EFK?

Resolution: Please check => here <=

 

may be applicable for your needs.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 4 of 4