Plantronics + Polycom. Now together as Poly Logo

Is UC software 4.1 need license activated

SOLVED
heruts
Occasional Contributor

Is UC software 4.1 need license activated

Is UC software 4.1 for IP phone 331 need license to activated, because when deploy with provisioning server, it request file (mac-address)-license.cfg.

Message 1 of 6
1 ACCEPTED SOLUTION

Accepted Solutions
SteffenBaierUK
Polycom Employee & Community Manager

Re: Is UC software 4.1 need license activated

Hello heruts,

 

please follow this up with a Polycom reseller in your region or => here <=

 

Best regards

 

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 6 of 6
5 REPLIES 5
SteffenBaierUK
Polycom Employee & Community Manager

Re: Is UC software 4.1 need license activated

Hello heruts,

welcome to the Polycom Community.

Our phones always attempt to load either an individual or a site license.

 

The UCS 4.1.x Software requires a License if used with LYNC. If you attempt to download this from the support page you have to acknowledge a disclaimer explaining this.

 

All other features requiring a license are described in the matching release notes.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 6
heruts
Occasional Contributor

Re: Is UC software 4.1 need license activated

thank you for reply,

it is used interoperability with lync 2010.

is the Non-VQMON license unable to activated uc software 4.1 for production suite site lisence?

what is different individual license and site license for lync 2010 interoperability with ip phone 331?

 

thank you.

 

Message 3 of 6
SteffenBaierUK
Polycom Employee & Community Manager

Re: Is UC software 4.1 need license activated

Hello ,

If used fore LYNC and when downloading the UCS 4.1.x Software you have to agree to the disclaimer explaining the need for a license.

 

Please be aware of the following when utilizing UCS 4.1.0 or later:

The use of Polycom UC Software versions 4.1.X (“Software”) requires the purchase of a separate Software license for every device that will use the Software in a Lync environment. You may not install, access, or use the Software in a Lync environment on more devices than are listed on your license until additional licenses have been purchased and authorized by Polycom. These licenses should be purchased from the same company from which you purchased the devices. You may operate devices against a Lync server for trial purposes for up to 30 days without purchasing a license. Use of the Software is subject to the terms and conditions of the End User License Agreement.

Polycom reserves the right to audit your deployment to verify that you have sufficient licenses to match the number of devices being used.

The community's VoIP FAQ contains this post here:

 

Dec 6, 2011 Question: What Phone Models support the LYNC Features added in UCS 4.0.1?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 4 of 6
heruts
Occasional Contributor

Re: Is UC software 4.1 need license activated

do you know how much price for purchase license ucs 4.1 for 290 unit ip phone 331? thank you.

Message 5 of 6
SteffenBaierUK
Polycom Employee & Community Manager

Re: Is UC software 4.1 need license activated

Hello heruts,

 

please follow this up with a Polycom reseller in your region or => here <=

 

Best regards

 

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 6 of 6