I am having complaints from my users where they say they are currently have 2 lines (speaking on one and the other one on hold) and if they get a 3rd call, they only see the number/name of the caller (CallerID) for about 1-2 seconds then it disappears. They still see the line button flashing green but cannot see who is calling. If they are not looking at the phone screen for those 2 seconds, they cannot see this. Only option is just to answer the call. Is there some settings that I am not seeing where this can be fixed? Phone is currently on firmware 5.9.3
Hello @hector.farinas ,
Welcome back to the Poly Community.
Not knowing your configuration or what SIP server this is a standard Poly configured VVX running the 184.108.40.2067 as an example would show the initial call like this:
After around 10 seconds the screen changes to:
The red circled section alternates if the number/name is longer. In addition, the navigation buttons can be used to go up and down if needed.
If this is not the case and no other volunteer can help you please open a ticket.
In order to raise a support ticket, you need to work with your Poly reseller as they may need to do this for you.
End Customers are usually unable to open a ticket directly with Poly support. Available End User Poly services offerings are detailed here
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.