Plantronics + Polycom. Now together as Poly Logo

Join a go to meeting with Polycom Trio

Highlighted
Frequent Advisor

Join a go to meeting with Polycom Trio

Hello all,

 

i think this is not the right topic to post,but it is about Trio and video.

After last firmware update (5.9.x),Trio supports H.323 protocol,so the question is if i can join a "go to meeting" meeting.

 

As far as i know, "go to meeting" supports only H.323,so will you make a .cfg file to import for this?

Like bluejeans,zoom,chime etc?

 

Thank you in advance.

 

Best Regards,

Message 1 of 5
4 REPLIES 4
Highlighted
Polycom Employee & Community Manager

Re: Join a go to meeting with Polycom Trio

Hello @sotiris ,

 

welcome back to the Poly Community.


An example configuration for Line 2:

 

<reg reg.limit="2"
reg.2.displayName="Trio-H.323"
reg.2.label="H.323"
reg.2.protocol.H323="1"
reg.2.protocol.SIP="0"
reg.2.server.H323.1.address="<H.323_Server>"
sec.H235.mediaEncryption.enabled="1"
sec.H235.mediaEncryption.offer="0"
sec.H235.mediaEncryption.require="0"
voIpProt.H323.enable="1" />

Please change them to your setup aka any line you want.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 5
Highlighted
Occasional Visitor

Re: Join a go to meeting with Polycom Trio

Hey Steffen,

 

Do you know if h.323 is now enabled on the Trio Visual Pro?

 

With thanks

 

AS.

Message 3 of 5
Polycom Employee & Community Manager

Re: Join a go to meeting with Polycom Trio

Hello @YorktelSA_UK ,

 

Welcome back to the Poly Community.


We have not as of yet released the next UC Software 5.9.1 which will officially add H.323 so the answer is not officially.

 

I am quite sure you can join our BETA program if you are interested so please work with a Poly sales engineer.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 4 of 5
Highlighted
Polycom Employee & Community Manager

Re: Join a go to meeting with Polycom Trio

Hello @sotiris  @YorktelSA_UK ,

 

Trio GA support of H.323 in 5.9.1 >here<

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 5 of 5