Plantronics + Polycom. Now together as Poly Logo

Keypad problem - SoundPoint IP 650

Highlighted
Occasional Visitor

Keypad problem - SoundPoint IP 650

Hi,

 

We have phone SoundPoint  IP 650 and we have problem with keypad. Sometimes it works very well and sometimes we have problem with dialpad (for example when I press digit 4  we got two digits 4 and 5 on display). The same situations is whan I press another button. 

 

I made a hardware diagnostic for keypad and sometimes it shows that under #1 is SoftKey1, under #2 is SoftKey1, under #6 is dialpad7 (not proper digits assignetd to buttons).

 

It's strange because it happens suddenly (everythink is OK and than problem with dialpad and I can't dial number).

After reboot for some time is OK (or not) and than suddenly again. Very annoying.

 

I have US Software 4.0.4 and BootROM 4.4.0B.

 

Is it software problem or rather hardware?

Any suggestion?

 

Best Regards,

Andrzej

Message 1 of 3
2 REPLIES 2
Highlighted
Polycom Employee & Community Manager

Re: Keypad problem - SoundPoint IP 650

Hello Andrzej,

welcome to the Polycom Community.

If the hardware test shows that wrong buttons are pressed the phone is most likely defective.

 

Was there any drink or other liquid spilled on it?

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 3
Highlighted
Occasional Visitor

Re: Keypad problem - SoundPoint IP 650

Hi,

 

Thanks for answer.

 

No, there wasn't any liquid spilled on phone.

I hoped that it's a software problem but it seems that it's hardware problem :-(

 

Do You think that it's possible to  fix it?

 

Best Regards

Andrzej

Message 3 of 3