Plantronics + Polycom. Now together as Poly Logo

Line Key Configuration web utility not populating

SOLVED
Occasional Visitor

Line Key Configuration web utility not populating

Our company has VVX 400 and VVX 600's throughout.  When we add Busy Lamp extensions to our phone screens, which is successful, they do not remain in the web utility.  We cannot modify, sort or remove the lines we've added.  We use the web interface to add the Static BLF but once we type in the fields and save, the lines are added to the phone, but the white boxes in the online portal are blank.  I've attached pics to give a visual.

In my case, my phone is:

VVX 600

UC Version 5.0.1.4068

BootROM Version 5.2.1.3271

 

Does anyone know how we get the online interface to sync with the BLF's on the phone?

2 REPLIES 2
Polycom Employee & Community Manager

Re: Line Key Configuration web utility not populating

Hello @Brimoth ,

 

welcome to the Polycom Community.


UC Software 5.0.1 is no longer a currently supported version.

 

Please use UC Software 5.9.1 instead


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier




<==== Signature / Disclaimer ======>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 3
Highlighted
Occasional Visitor

Re: Line Key Configuration web utility not populating

Thank you for the response.  I will upgrade to the current version.

Message 3 of 3