cancel
Showing results for 
Search instead for 
Did you mean: 

[NEW] VVX D60 Wireless Handset

Highlighted
Polycom Employee & Community Manager

[NEW] VVX D60 Wireless Handset

 

NOTE: The VVX D60 base station requires a VVX Desktop Phone (aka a compatible VVX 300 series, 400 series, 500 series, and 600 series business media phones) to be running at least UC Software 5.4.3 and does not support LYNC / Skype for Business Base Profile.

 

VVX D60 Wireless Handset

 

vvx-d60-tb-com-650x500-enus.jpg

Setting up the D60:

 

  • Browse to the Web Interface of the Phone and enable the VVX D60 Profile via Settings > VVX D60 Settings
    D60_01.PNG
  • Select Automatic for the Pairing
    D60_02.PNG

  • Any available Base Stations will be found
    D60_03.PNG

  • Any available Base Stations will be displayed and the MAC Address can be used to identify an individual base if there are more than one.
    D60_04.PNG

  • Once the Base Station has been paired it will automatically amp the first Line to the DECT Handset and the VVX
    D60_05.PNG


  • The Handset Line Mapping Feature can be used to change the association of DECT Handsets and the Lines
    D60_06.PNG

 

Note:

  1. Change in line mapping options clears corresponding local phone configurations.
  2. You can map 5 lines to each handset.
  3. Always map the first line to the VVX or the VVX and Handset
  4. Shared lines can be mapped to one device.

 

VVX D60 Wireless Handset Limitations

 

Update 22/06/2017:

 

Feature Upto 5.4.4 5.4.5 5.4.6 and  later 5.5.1 5.5.2
Busy Lamp Field (BLF) No No Yes (on paired VVX) Yes (on paired VVX) Yes (on paired VVX)
Hunt Groups No No Yes (on paired VVX) Yes (on paired VVX) Yes (on paired VVX)
Local Conference Calling Yes Yes Yes Yes Yes
Push-to-Talk No No NO NO NO
Shared Line Appearance/Shared Call Appearances Yes (BroadSoft only) Yes (BroadSoft only) Yes (BroadSoft only) Yes (BroadSoft only) Yes (BroadSoft only)
Simultaneous Calls (G.729 Encode/Decode) Yes (maximum 4 active calls) Yes (maximum 4 active calls) Yes (maximum 4 active calls) Yes (maximum 4 active calls) Yes (maximum 4 active calls)
Skype for Business Line Registration No No NO NO NO
USB Call Media Recording (CMR) No No No NO NO
VVX Camera Yes Yes YES YES YES
VVX Expansion Module No Yes YES YES YES
Feature Line Keys (FLK) No No NO NO NO
Automatic Call Distribution (ACD) / Hoteling No No NO NO NO
CDP support on D60 base station No No No No Yes
Call Handoff between VVX and D60 Handsets on twinned lines No No No No No
Configure maximum number of Handsets  No No No No No
Pairing using MAC address of VVX-D60 No No No No No

 

Please check the above prior to the following known limitations of using the VVX D60 wireless handset with the supported VVX business media phones:

  • The VVX D60 wireless handset and base station are supported on VVX 300 series, 400 series, 500 series, and 600 series business media phones.

  • Hoteling, Busy Lamp Field (BLF), Enhanced Feature Keys, and Automatic Call Distribution (ACD) are not supported on the wireless handset, but these features are still available for the paired VVX business media phone. See => here <= for a working scenario

    An extension shared with the D60 Handset cannot use any of the above features (August 2016See => here <= for a working scenario

  • Pairing a base station with a VVX business media phone with a VVX expansion module connected is not supported prior to UC Software 5.4.6. If a VVX expansion module is connected to a VVX phone with a paired base station, the wireless handset is automatically unpaired from the VVX phone using any older Software than 5.4.6.

  • Only shared lines on the BroadSoft BroadWorks server are supported on the wireless handsets. Pre 5.4.6

  • BroadSoft shared lines (SCA/SLA) can be assigned to either the VVX host phone or the wireless handset. A shared line assigned to the VVX host phone and a registered wireless handset cannot be a supported as a twinned line on the wireless handset.

  • Call Park is only supported on the BroadSoft BroadWorks server for the wireless handsets.

  • The VVX D60 feature and accessories are not supported in Microsoft Lync 2010, Lync 2013, or Skype for Business 2015 environments.
  • The wireless handset supports SIP registered lines only. H.323 protocol is not supported on the wireless handset.

  • Flexible Line Key customization is not available on VVX business media phones with a paired wireless handset.

  • Outgoing calls placed on the wireless handset are not shown in the Recent Calls list on the VVX business media phones, and users cannot redial a call placed on the wireless handset from the VVX phone.

  • You can only rename a wireless handset when the Intercom feature is enabled.

  

More details can be found => here <=

 

SOFTWARE UPDATE

 

VVX downloading DECT Handset update:

DECT_SoftwareUpdateDownload.PNG

 

VVX Updating DECT Handset:

 

DECT_SoftwareUploadToHandset.PNGDECT_Upgrade.png

 

VVX Idle / paired with a DECT handset(s)

 

DECT_IDLE.PNG

 

Factory Resetting of the VVX D60 Base Station:

 

If user would like to reset the base station, there is a reset button beside the power socket, use pin/paper clip to long press for 7 sec.

 

D60_reset.png

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 1 of 1