-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Phones
- Desk and IP Conference Phones
- Re: No "confrnc" soft key showing - SoundStation IP4000
Create an account on the HP Community to personalize your profile and ask a question
11-12-2013 02:24 PM
Our SoundPoint IP 4000 is not showing a "conference" soft key during active calls - only “hold” “end call” and “transfer." I tried resetting to factory defaults and re-configuring to no avail. Some research online showed that there is a way to program the soft keys - thinking that maybe the previous owner of the phone (we inherited these phones with our office) had the soft keys specially configured. Any suggestions on how to get the conference soft key to appear?
Solved! Go to Solution.
Accepted Solutions
11-25-2013 08:29 PM
Hello,
You should check the codec the SSIP4000 is using for the call as well. The 4000 does not support local conferencing if g.729 audio codec is used.
3.1.x Admin Guide:
Conferences are not available when the G.729 codec is enabled on the
SoundStation IP 4000 conference phone.
11-25-2013 09:22 AM
Hi Dave,
Thanks for the questions:
1. I'm running 3.1.7.0134
2. No hardware PBX, we use Onsip as a virtual PBX
3. What exactly are looking for in terms of configuration? Newtork configuration? Boot server?
Thanks,
Sarah
11-25-2013 09:33 AM
Hi Sarah
Configuration im looking for is the phone configuration....are you able to access the sys.cfg and mac.cfg config files on your provisioning server in order to edit them?
I only ask as its easier to pin point where the config may be in need of editing and if you have custom softkeys configured and any macros that may be used in them....
If you also have any syslog entries that you could post that would be helpful in determining what exactly is the cause...
I hope this helps explain a bit better why posting snippets of config is very useful...
Many thanks
Dave
11-25-2013 12:24 PM
Thanks, Dave. Sadly, I'm now way out of my comfort zone. As the COO of a small non-profit, I wear many hats, but some don't fit very well! I have no idea how to access those configuration files, unfortunately. If the fix is likely to be very technical, it's probably better if I try to find a replacement phone....
Sarah
11-25-2013 08:29 PM
Hello,
You should check the codec the SSIP4000 is using for the call as well. The 4000 does not support local conferencing if g.729 audio codec is used.
3.1.x Admin Guide:
Conferences are not available when the G.729 codec is enabled on the
SoundStation IP 4000 conference phone.
12-02-2013 07:22 AM
Chad_A - thank you! That was the problem. I went into the web interface, under General, Audio Processing and selected "Not Used" for the G729 codec. Rebooted the phone and now conferencing is working brilliantly. Appreciate the help!
Sarah
Didn't find what you were looking for? Ask the community